Daily disposable lenses

Contact lens blister packs: what the liquid is, how to open one, and when not to use it

The liquid in a contact lens blister pack is buffered saline with a small amount of an added ingredient that differs by brand: methyl ether cellulose in ACUVUE OASYS 1-Day, polymeric wetting agents in DAILIES TOTAL1, poloxamer 407 in clariti 1 day. The lens and the liquid are sealed under the foil and sterilized together, and Johnson & Johnson says the package is designed “to keep the lens sterile while the package is sealed,” which is why a pack that is open or has leaked is one to skip. To open one, shake it to check the lens is floating, peel the foil back with the pack resting on a table, and slide the lens up the side of the bowl with a fingertip.

Packaging details are quoted from the manufacturers' US patient guides and package inserts and from FDA 510(k) filings, handling steps from Johnson & Johnson's ACUVUE guides, and hand washing from CDC, all checked in November 2026. Manufacturers revise their labeling, so the insert that came with your lenses and your eye care professional have the final word.

The short answer

Saline is the base, and each brand adds its own extras

Every daily lens document quoted below starts from buffered or isotonic saline. The extras differ: povidone in 1-DAY ACUVUE MOIST, and hydroxypropylmethyl cellulose plus polyethylene glycol 400 in DAILIES AquaComfort Plus. The liquid in one brand's blister is not the liquid in another's.

It does its job only while the foil is sealed

Johnson & Johnson says its blister “is designed specifically to keep the lens sterile while the package is sealed.” Once the foil comes back, the lens goes on your eye or in the trash. A daily lens is discarded when it comes out, so the leftover liquid has nothing left to hold.

Shake, peel, slide

Shake the pack and check that the lens is floating, peel back the foil, then slide the lens up the side of the bowl with a fingertip. J&J's guides say “NEVER use tweezers or other tools” to lift a lens out, and that a lens stuck to the foil is “still perfectly safe to use.”

Skip any pack that fails a check

An opened or damaged blister, a pack with no liquid, numbers on the foil that do not match your prescription, or a date that has passed: in each case, set that pack aside and open the next one. J&J's line for a damaged lens is “DO NOT use it. Use the next lens in the multi-pack.”

What each maker puts in the blister

The quotes are each manufacturer's own description of the liquid its daily lens ships in. Water content is the share of the hydrated lens's weight that is water, from the same documents.

Daily lensPackaging solution, in the maker's wordsLens water contentDocument
ACUVUE OASYS MAX 1-DayJohnson & Johnson“borate buffered saline solution with methyl ether cellulose”38%Patient instruction guide and package insert, both revised 08/2024
ACUVUE OASYS 1-Day with HydraLuxeJohnson & Johnson“borate buffered saline solution with methyl ether cellulose”38%Patient instruction guide 20602110 (03/2023); package insert revised 02/2026
1-DAY ACUVUE MOISTJohnson & Johnson“borate buffered saline solution with povidone”58%Patient instruction guide and package insert, both revised March 2023
DAILIES TOTAL1Alcon“isotonic phosphate buffered saline solution (PBS) with polymeric wetting agents that form the water gradient surface”About 33%FDA 510(k) summary K182782, prepared December 17, 2018
PRECISION1Alcon“isotonic phosphate buffered saline solution (PBS) with approximately 0.3% of polymeric wetting agents consisting of copolymers of polyamidoamine and poly (acrylamide-acrylic) acid”51%FDA 510(k) summary K182902, prepared December 5, 2018
DAILIES AquaComfort PlusAlcon“phosphate-acetate buffered saline solution” that “may contain up to 0.05% Poloxamer 108,” plus “the comfort additives hydroxypropylmethyl cellulose (HPMC) and polyethylene glycol 400 (PEG 400)”69%FDA 510(k) summary K180669, prepared March 8, 2018
clariti 1 dayCooperVision“isotonic saline solution with 0.005% or 0.020% w/v poloxamer 407 added”56%Fitting guide PFG01047, revision B, June 2021
MyDayCooperVision“Phosphate Buffered Saline Solution with Tween and 100 ppm e-PL,” the epsilon-polylysine added “as a preservative”54%FDA 510(k) K191763, summary prepared June 28, 2019, cleared March 23, 2020
Biotrue ONEdayBausch + Lomb“borate buffered saline solution with poloxamine”78%Package insert and fitting guide, Rev. 2019-11
INFUSEBausch + Lomb“phosphate buffered saline solution with potassium chloride, poloxamine, poloxamer 181, glycerin, and erythritol”55%Package insert and fitting guide, Rev. 2023-07

The Johnson & Johnson, clariti 1 day and Bausch + Lomb rows come from the patient guides, package inserts and fitting guides posted on the makers' US sites. The Alcon and MyDay rows come from FDA 510(k) summaries, dated as shown. A formula can change between filings, and the carton and insert that came with your lenses are the current word. One document disagrees with itself: the 1-DAY ACUVUE MOIST package insert says povidone in its How Supplied section, matching the patient guide, while its description section names methyl ether cellulose.

Buffered means the solution holds its pH steady. Isotonic, the word Alcon and CooperVision use, means its salt concentration matches the body's. The documents explain the extras only in places. Alcon calls the HPMC and PEG 400 in DAILIES AquaComfort Plus packaging “comfort additives,” and describes the DAILIES TOTAL1 wetting agents as polymers “that form the water gradient surface” of the lens. CooperVision's MyDay filing, cleared in March 2020, says the epsilon-polylysine was added to the packaging solution “as a preservative.” The Johnson & Johnson and Bausch + Lomb documents name their additives without saying what each one is for.

Why the lens ships in liquid

A soft lens is mostly water. By the makers' own figures, the lenses in the table run from about 33% water for DAILIES TOTAL1 to 78% for Biotrue ONEday, measured with the lens hydrated in saline. The liquid keeps it that way from the factory line to your fingertip.

The pack is also how the lens stays sterile. Alcon's filing describes lenses “immersed in buffered saline solution” and sealed in individual foil blisters, then “terminally sterilized in a validated autoclave (moist heat, steam under pressure).” CooperVision's MyDay filing lists moist heat sterilization, and J&J's symbol key includes “Sterilized Using Steam Heat.” From then on, J&J says, the package “is designed specifically to keep the lens sterile while the package is sealed.”

The package itself is simple. Alcon describes “an injection molded polypropylene blister shell sealed with a polyester coated aluminum foil lidding material top,” supplied “in strips of five foil sealed blister packs,” each holding about 0.65 ml of solution for DAILIES AquaComfort Plus and DAILIES Total1 at the time of that 2018 filing. CooperVision describes MyDay's as “injection molded polypropylene blisters covered by aluminum foil laminate.” J&J's symbol key lists one for a “Single Sterile Barrier System,” and the sealed blister is that single barrier.

The date printed on the foil belongs to the same design. Alcon's filings say the expiration date “has been established through stability studies that have assessed the chemical stability of the lens and package integrity (ability to maintain sterility).” A pack past that date is outside what those studies covered, and the pack expiration tracker puts the earliest foil date first in line.

How to open a blister pack

The three ACUVUE daily lens guides give the same opening steps, quoted below with CDC's hand washing instruction in front. The CooperVision and Bausch + Lomb documents quoted here describe the inspection that follows in similar terms.

  1. Step 1

    Wash and dry your hands

    CDC's instruction is to “Wash hands thoroughly with soap and water before handling lenses” and to “Dry hands completely with a clean cloth before touching lenses.”

  2. Step 2

    Match the foil to the eye

    Read the numbers printed on the blister before you open it. J&J's guide says to confirm that the parameters “printed on the multi-pack and on the individual lens package match your prescription,” and “DO NOT use if there is a mismatch.”

  3. Step 3

    Shake the pack and look

    “Shake the lens package and check to see that the lens is floating in the solution.” No liquid and no floating lens means the pack goes aside unopened.

  4. Step 4

    Peel the foil on a flat surface

    “Peel back the foil closure to reveal the lens.” J&J adds that steadying the pack on the table top will “minimize the possibility of a sudden splash.”

  5. Step 5

    Slide the lens out with a fingertip

    “Place a finger on the lens and slide the lens up the side of the bowl of the lens package until it is free of the container.” No tweezers, no tools and no fingernails on the lens.

  6. Step 6

    Inspect it before it goes in

    Check that it is “a single, moist, clean lens that is free of any nicks or tears,” and that it is not inside out. If it looks damaged, J&J says “DO NOT use it. Use the next lens in the multi-pack.”

  7. Step 7

    Start with the same eye every time

    J&J's handling tips say to “Develop the habit of always working with the same lens first to avoid mix-ups.”

If the lens sticks to the foil or the plastic

It happens, and J&J addresses it directly: “Occasionally, a lens may stick to the inside surface of the foil when opened, or to the plastic package itself. This will not affect the sterility of the lens. It is still perfectly safe to use.” Lift it with a fingertip the same way, then inspect it before it goes in.

If the lens folds or flattens on your finger

Bausch + Lomb's INFUSE booklet says to place a lens that folds and sticks together in the palm of your hand, “wet thoroughly with the recommended rewetting solution,” and rub it gently back and forth between your index finger and palm. For a lens that flattens or drapes across your finger, it says “the lens or your finger may be too wet,” and to dry your finger by passing the lens several times from one index finger to the other, drying the opposite finger each time.

Inside out or right side out

J&J gives two checks that work on any soft lens. On a fingertip, “The lens should assume a natural, curved, bowl-like shape. If the lens edges tend to point outward, the lens is inside out.” Or squeeze it gently between thumb and forefinger: “The edges should turn inward. If the lens is inside out, the edges will turn slightly outward.” Its guides also describe a 1-2-3 marking on ACUVUE OASYS MAX 1-Day, ACUVUE OASYS 1-Day and 1-DAY ACUVUE MOIST lenses, read from below with the lens on your finger, and note that the marking is not present on the astigmatism versions.

If an inside-out lens makes it onto the eye, CooperVision's clariti 1 day guide lists the signs that it should come out and go back in correctly: “Less than usual comfort,” “The lens folds on the eye,” “Excessive lens movement on blink” and “Blurred vision.” The INFUSE booklet gives a nearly identical list.

With long nails

The ACUVUE guides say it is helpful to keep your fingernails short and smooth, and not to touch the lens with them. For wearers who keep them long, ACUVUE's February 2025 advice is to use the pads of your fingers, which give “more control and sensitivity,” and suggests keeping the index finger and thumb nail of your dominant hand shorter than the rest. It also points out that a small sink is a poor place to handle lenses, because a lens can fall in or pick up tap water, and that working over a clean, flat surface makes a dropped lens easier to find.

Checks before the lens goes in

Each blister carries its own label, so a loose pack separated from its carton still identifies itself. CooperVision's clariti 1 day blister “is labeled with the base curve, diameter, dioptric power, cylinder and axis for toric lenses, multifocal add for multifocal lenses, manufacturing lot number, and expiration date of the lens, and the presence of a UV-blocker is noted.” J&J's 1-DAY ACUVUE MOIST insert lists base curve, power, diameter, lot number and expiration date, with cylinder and axis added for the astigmatism lens and ADD power for the multifocal. The prescription decoder explains each abbreviation.

CheckWhat the maker saysIf it fails
The cup is whole and the foil is sealedJ&J: “DO NOT use if the sterile blister package is opened or damaged.” CooperVision: “Do not use if blister pack has been broken or damaged.”Set it aside and open the next pack.
The lens floats in liquidJ&J: “Shake the lens package and check to see that the lens is floating in the solution.”A blister with no liquid has most likely leaked, so treat it as a damaged package.
The foil matches your prescription and the eyeJ&J: confirm the parameters “printed on the multi-pack and on the individual lens package match your prescription. DO NOT use if there is a mismatch.”Leave it sealed. Check the carton, and if a whole box is wrong, contact the seller before opening more.
The date has not passedBausch + Lomb: “Each container is marked with the manufacturing lot number of the lens, diopter power, and expiration date.”Do not use it. Sorting packs so the earliest foil date comes first keeps this from happening.
The lens is whole, moist and cleanJ&J: “examine it to be sure that it is a single, moist, clean lens that is free of any nicks or tears.”“DO NOT use it. Use the next lens in the multi-pack.”
The lens is right side outCooperVision: “Simply inspect the lens to see if the edges turn out. If they do, the lens is inside out.”Flip it and check again. J&J's guides say to invert the lens and confirm the orientation.

Seal failures do reach recall scale. In June 2025 CooperVision began a recall of Biofinity XR Toric lots because “Lens blisters may have an incomplete or leaking seal which may render them unsterile” (FDA recall Z-2165-2025, posted July 23, 2025). That recall covered a reusable lens rather than a daily one, and it is a reminder that a seal can fail before a pack reaches you. To check the lot on your own packs against FDA records, the recall lookup guide shows where the lot is printed on blisters and cartons.

What the symbols on the carton and foil mean

J&J's guides carry a symbols key for the marks that “may appear on the label or carton,” and Bausch + Lomb's inserts carry one too.

Symbol, as the key defines itWhat it means for the pack
Use-by Date (expiration date)The last date to open the pack. Alcon's FDA filings say the date is set by stability studies of “the chemical stability of the lens and package integrity (ability to maintain sterility).”
Batch CodeThe lot number. It is printed on each blister as well as the carton, and it is the number FDA recall records list.
Sterilized Using Steam HeatThe lens and its liquid were sterilized with steam inside the sealed pack. Bausch + Lomb's key uses “Sterile Using Steam or Dry Heat.”
Indicates a Single Sterile Barrier SystemOne sealed layer keeps the contents sterile: the blister itself. A cracked cup or a lifted corner of foil breaks it.
Do Not Re-Use (Single Use)One wear per lens. Bausch + Lomb's key prints the same instruction as “Do Not Reuse.”
Do Not Use if Package is DamagedLook at the cup and the foil before you peel, not after.
Lens Orientation Correct and Lens Orientation Incorrect (Inside Out)J&J's pictures for the inside-out check described above.
Temperature LimitationFrom the Bausch + Lomb key: the storage range for sealed packs. Other makers word storage differently, so read the label on your own lenses.
Caution, Consult Instructions for UseThe patient guide for your lens has the full handling instructions.

Storage wording differs by maker, and the guide to storing sealed daily lenses collects what each one publishes. The single-use symbol is the subject of the guide to reusing daily contacts.

The liquid's job ends when the foil comes off

Once the foil is peeled back, the lens has one destination. J&J's daily lenses are “for single use only (daily disposable) and should be discarded upon removal,” so there is no worn lens to keep in the leftover liquid, and nothing in the labels quoted here gives the packaging solution a second use. J&J's package insert says “Do not use saliva or anything other than the recommended solutions for lubricating or rewetting lenses,” and the FDA's lens care advice is to “Never reuse any lens solution.”

If a lens needs wetting while you wear it, the same insert says eye care professionals “may recommend a lubricating/rewetting solution which can be used to wet (lubricate) lenses while they are being worn.” Water is never the fallback. The FDA says “Do not expose your contact lenses to any water: tap, bottled, distilled, lake or ocean water,” and warns against homemade saline.

After the lens is out, pour the leftover liquid away. The blister pack recycling guide covers where the empty cup and the foil lid go.

Keep sealed packs sorted until the day you open them

Most of the checks above get quicker when each eye's packs are kept apart and the earliest dates sit in front. The numbers on the foil then match the eye you are reaching for, and a pack with a lifted corner shows up before the morning you need it. J&J also writes a backup into each of its guides quoted here: “You should always have spare lenses or glasses available.” A few sealed packs per eye in a bag cover a lens that tears on its way out of the blister.

Sealed packs, sorted by eye

A Sturdysight organizer is a paired set, one hard-shell case labeled L and one labeled R, for unopened daily-disposable blister packs. The shell is waterproof and fits all brands of daily-disposable blister packs, so each eye's supply stays together at home and a few spares can ride in a bag. It is dry storage for sealed packs, not a soaking case, and it never holds a bare lens or solution.

The organizer size chart compares Small, Medium and Large side by side.

Contact lens blister pack FAQ

What is the liquid in contact lens packaging?

Buffered saline with a small amount of an added ingredient that varies by brand. Johnson & Johnson packs ACUVUE OASYS 1-Day in borate buffered saline with methyl ether cellulose, Alcon describes DAILIES TOTAL1 packaging as isotonic phosphate buffered saline with polymeric wetting agents, CooperVision uses isotonic saline with poloxamer 407 for clariti 1 day, and Bausch + Lomb uses borate buffered saline with poloxamine for Biotrue ONEday. The lens and the liquid are sealed and sterilized together in the blister.

Is the solution in a contact lens blister the same for every brand?

No. Saline is the common base, and the extras differ: povidone in 1-DAY ACUVUE MOIST, hydroxypropylmethyl cellulose and polyethylene glycol 400 in DAILIES AquaComfort Plus, poloxamine in Biotrue ONEday, and potassium chloride, poloxamine, poloxamer 181, glycerin and erythritol in INFUSE. CooperVision's MyDay filing, cleared by the FDA in March 2020, added epsilon-polylysine to the packing solution as a preservative.

Can I use the liquid from the blister to rinse or store a lens?

None of the labels quoted here gives it a second use. Daily disposable lenses are discarded when they come out, J&J's package insert says not to use saliva or anything other than the recommended solutions for lubricating or rewetting lenses, and the FDA's lens care rule is “Never reuse any lens solution.” Once the foil is open, the pack is no longer the sealed package J&J describes as designed to keep the lens sterile.

Is a contact lens stuck to the foil still safe to use?

Yes, according to Johnson & Johnson: “Occasionally, a lens may stick to the inside surface of the foil when opened, or to the plastic package itself. This will not affect the sterility of the lens. It is still perfectly safe to use.” Slide it free with a fingertip, never tweezers, and inspect it for nicks or tears before it goes in.

What should I do if a blister pack has no liquid in it?

Do not use that lens. J&J's first opening step is to shake the pack and check that the lens is floating in the solution, and J&J, CooperVision and Bausch + Lomb each say not to use a package that is opened or damaged. Open the next pack. If several in one box are dry or leaking, note the lot number on the foil and the carton before you contact the seller or the manufacturer.

How do you open contact lens packaging with long nails?

Rest the pack on a table, peel the foil back, and slide the lens up the side of the bowl with the pad of your finger rather than a nail. ACUVUE's advice for long nails is to use the pads of your fingers, to consider keeping the index finger and thumb nail of your dominant hand shorter than the rest, and to work over a clean, flat surface instead of a small sink, where a lens can fall in or pick up tap water.

How much liquid is in a contact lens blister?

Less than a milliliter. Alcon's March 2018 FDA filing gave about 0.65 ml per blister for DAILIES AquaComfort Plus and DAILIES Total1, and about 0.85 ml for Focus DAILIES and FreshLook One-Day. That is roughly an eighth of a teaspoon. It can still splash when the foil comes off, and J&J suggests steadying the pack on a table top to prevent that.

Do you rinse a new contact lens before putting it in?

Not in J&J's instructions. Its steps go from lifting and examining the lens to checking that it is not inside out and placing it on the eye, with no rinse in between. If a lens needs wetting, the package inserts point to the lubricating or rewetting solution your eye care professional recommends, and the FDA says “Do not expose your contact lenses to any water: tap, bottled, distilled, lake or ocean water.”

Sources

Manufacturers revise their labeling. The insert for your own lenses, and your eye care professional, are the final word on how they should be handled and worn.